• Clear the clog with a plunger – Plunging is most effective if the blockage is not deep. If the clog is near the plug hole, a plunger will likely help you flush it down the drain. If you are unable to get a good seal with the plunger, you can try applying Vaseline to the rim to get a better result.
• Use hot Water – If your shower is clogged by soap scum, pouring hot water will loosen it and get it down your drains. If the blockage is caused by other solid stuff, the hot water technique will not work
• Try baking powder and vinegar – Pouring a mixture of baking powder and vinegar can help dissolve gunk or clog of hairs. Firstly, pour a cup of baking powder in your drain, wait for a few minutes, and add a cup of vinegar. After a few hours, rinse the drain with boiling water. This should free up the gunk in your drain.
• Pull out the blockage with your hand – This can be done either by using your hand or a hook to pull out or dismantle the clog. Remove the drain cover by unscrewing it, check the drain if the blockage can be accessed with your hand, if yes, wear gloves and get it out. If the blockage is deep, you can use a wire or any other improvised material to pull it out
• Use a snake – A plumber’s snake can be used to push down the blockage.
• Chemicals – This is often the last DIY resorts. If you have tried all the techniques above and the blockage still exists, it is time to start the chemical warfare. There are varieties of chemicals at local stores that can help you unblock your drain. This technique shouldn’t be used regularly, some chemicals can corrode your pipes or damage your sewage system over time.
• Contact Professionals – If all the DIY techniques fail to unblock your clogged shower, it is time to call professionals like Cheap Plumbing Services Los Angeles.

How to prevent your shower from clogging

As in all circumstances, it is always cheaper to prevent a problem than to find the solution when they occur. Follow the steps below to prevent your shower drain from clogging:

• Install a drain cover – Drain covers are inexpensive, they can keep out hair and stop other guck from going down your drain. Scrub off the dirt on the cover regularly to prevent it from getting blocked.
• Don’t wash foreign materials down your drains – Keep out debris, hairs other solid items from finding their way down your drain.
• Flushing your drains regularly – You can flush your shower drain by using hot water or organic materials like baking powder and vinegar.

Common causes of clogged shower drain

1. Hair – it is the most common culprit; it can bind with other materials to clog
2. Soap – Soap scum often combines with minerals in water to form hard residues that can clog your shower drain
3. Minerals in water – it often dissolves and builds up in the drain

If your shower is clogged or you like to have more information to prevent its occurrence, please contact Cheap Plumbing Services Los Angeles (626)535-2213. We ready and waiting to help.

The post What to do when your shower is clogged appeared first on Cheap Plumbing Service | Los Angeles.

A dishwasher saves our time as well as our energy when it comes to cleaning the dishes. Gather all the dirty dishes and put it in the appliance and let it do the work. It cleans your dishes well and uniformly. And like any other electronic appliances, your dishwasher to has its own issues.

You need to plan on changing your dishwasher when you start noticing these signs in it;

Your dishwasher gets old

The main sign to change your dishwasher is when the dishwasher gets old. If you are having a dishwasher more than 10 years old, then you should prefer changing it to cut off on water and the electricity wastage. And it is even more important to change it if it’s a lower end model. But it also depends on the usage of your dishwasher. Notice it’s age and change it at the right time.

Rusting of the appliance

If you notice any rusting on the outside, then you need not immediately change it. But if there is anything like that inside the dishwasher, then you should probably plan on changing it.

The rusting inside the dishwasher indicate the leakage of the water or the metal is breaking away. It might also be that the small pieces of rusty particles are getting on to your clean dishes, thus making it even more dangerous.

Keep a check on your dishwasher appliance inside and out so that it is safer on both sides.

Door locking issues

If the door lock or the latch is broken then the dishwasher won’t be able to run the wash cycle properly with the water leakage, creating a bigger mess. If the dishwasher is new, then ask the experts if it can be prepared. Sometimes you will have to spend a huge amount on repairing the doors or spare parts if it’s expensive.

And if the dishwasher is already old and has broken parts, then it’s better to change the dishwasher than spending so much on the repairs.

Water remains after the wash cycle

It is common to find a little bit of water inside the dishwasher after the wash. But if you start seeing the pool of water after the wash at the bottom of the dishwasher then it can be little concerning.

It might have so happened that the drain pipe is clogged or there is a minor blockage with some small food particles inside it.

If it isn’t clogged, then it’s time to call the plumber and get it checked or entirely change your dishwasher.

The dishes are cold after the wash

Whether you use the drying option on your dishwasher or not, but the dishes should be hot on the immediate touch after the wash. If you notice that they aren’t hot as much as they are supposed to be then they might not be as clean or sanitized as you are expecting them to be.

According to experts, there is a certain temperature in which the device has to maintain and clean the dishes. If the heating coil in the appliance isn’t working, then it should be either repaired or better replaced.

When it starts to make noises

One of the significant signs that you need to change the dishwasher. But before that, you have to be aware of how the dishwasher is making noise. You should find out if the dishes are hitting one another or its the unusual noise that the dishwasher has started to make.

If you find any abnormality in the noise, then it’s time to change your dishwasher.

These are the few signs that might be warning you about the dishwasher not working properly or getting old. Change the dishwasher before it breaks down and lets you spend more of your energy and money.

The post Time to change your dishwasher with these signs appeared first on Cheap Plumbing Service | Los Angeles.